Highlights:

• Up to four AMD Opteron 6100 series multi-core microprocessors (Magny-Cours)
• Up to 128GB of 800MHz DDR2 FBD memory
• Extreme compute density
• Industry standard systems management with IPMI 2.0
• Integrated optional InfiniBand DDR port
• Two x8 expansion slot

Processor:

• Supports up to four sockets AMD® Opteron® 6100 eight-core or twelve-core processors (Magny-Cours)
  Click for a list of supported processors
  

Chipset:

• nVIDIA nForce Pro 3600 PCI Express controller and Southbridge I/O hub

System Memory:

• Supports up to 128GB of registered DDR2 SDRAM
• Supports 800MHz and 667MHz Memory

Expansion Slots:

• One PCI Express x16 slot on Riser Supports One Low-Profile PCI Express x16 card)

Networking:

• Eight  (8) 10/100/1000 Base-T LAN ports (Intel® 82571EB) (four per node)
• Two Infiniband Ports (optional)
  - Mellanox InfiniHost III Lx DDR MT25204A0-FCCD single port

• Two XGI Volari Z9s 16MB PCI graphics controller (One per node)

Storage

• Four hot-swap SATA 2.0 HDD (Two drives per node)
• SATA 2.0 ports from Intel ESB2 Southbridge
• One slim CD or DVD drive

Operating System:

• Red Hat® Enterprise Linux®
• SUSE LINUX Enterprise Server
• Microsoft® Windows® Server Enterprise & Standard Editions
• Sun® Solaris
• CentOS

Integrated Hardware Monitor:

• CPU thermal and voltage monitor support
• SMSC SCH5017 w/ 2x EMC6D103 Hardware Monitor IC
• Supports Windows and Linux based hardware monitor
• Fan speed control and monitoring
• Chassis Intrusion detection 

Systems Management (optional)

• HPC Systems Server Management Daughter card Supports IPMI 2.0 specifications
• Command Line Interface (CLI), Web Based, or Customized Remote Management Software
• Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
• LAN Alert-SNMP Trap
• Event Log
• Hardware Health Monitor
• Remote Power Control
• Support RMCP & RMCP + Protocols

Chassis

• 1U form factor
• 29.2" D x 7.2" W x 1.72" H    (741.6mm x 436mm x 43.6mm)

Power Supply:

• High efficiency (80+) EPS 12V, 1U, 1000W with PFC for (2) Two nodes
• 100V~240V AC input
• Independent power control for each node

Front Panel:

• Power, ID, NMI and Reset switch
• Power LED, HDD LED, LAN activity LED, IB LED, ID LED and system overheat LED
• Two USB 2.0 ports

Rear Panel:

• Four PS/2 ports (Two per node)
• Two VGA ports (One per node)
• Four USB 2.0 ports (Two per node)
• Eight RJ45 Ethernet ports (Four per node)
• Two DB9 Serial Port (One per node)

System Operating Environment:

• Operating Temperature Range: 10 - 35°C
• Non-Operating Temperature Range: -40 - 70°C
• Humidity Range: 8 - 90% non-condensing

Service and Support:

• Two years standard parts and labor warranty
• Optional on-site maintenance and support services available